Dovient

Compliance

OSHA forklift requirements, certification & records

What the OSHA forklift standard requires for operator training and certification, daily truck examinations, repairs and records, and what an inspector asks to see.

The rule in plain terms

OSHA's forklift standard is 29 CFR 1910.178, powered industrial trucks. It covers forklifts, pallet jacks with a motor, reach trucks, order pickers and other powered trucks used in general industry. It puts two jobs on the employer: make sure every operator is trained and evaluated, and make sure every truck is safe before it is used.

Forklift OSHA training and certification

There is no OSHA-issued forklift license. The employer certifies that each operator was trained and evaluated. The certification lists the operator's name, the date of training, the date of evaluation and who did the training or evaluation ((l)(6)). A wallet card from an outside course does not replace your own evaluation on your trucks.

  • No one operates a truck until they have been trained and evaluated, except trainees under direct supervision (1910.178(l)(1)).
  • Training is a mix of formal instruction (classroom, video, online) and hands-on practice, followed by an evaluation of the operator in your workplace ((l)(2)).
  • Topics cover the trucks they will drive and your workplace: loads, ramps, aisles, pedestrians, charging or fueling areas ((l)(3)).
  • Refresher training is required after unsafe driving, an accident or near miss, a poor evaluation, a new type of truck, or a change in the workplace ((l)(4)(ii)).
  • Each operator's performance is evaluated at least once every three years ((l)(4)(iii)).

Daily examinations and repairs

Each truck must be examined before it is placed in service, at least daily, and after each shift where trucks run around the clock (1910.178(q)(7)). The operator checks forks, mast and chains, hoses, tires, horn, lights, brakes, steering and seat belt before driving.

A truck that is not safe must be taken out of service until it is repaired, and repairs are made by authorized people ((p)(1), (q)(1)). Nameplates and markings must be in place and legible ((a)(6)). Modifications that affect capacity or safe operation, such as an added attachment, need the manufacturer's prior written approval, and the capacity plate has to be updated ((a)(4), (a)(5)). A missing or wrong data plate is a common citation.

Records to keep and what an inspector looks at

In a forklift compliance inspection, the officer usually watches trucks in use, checks data plates, asks an operator to show the daily check, and then asks for training certifications. After an incident, expect questions about whether that operator was evaluated on that type of truck.

  • Training and evaluation certification for every current operator, with the last evaluation within three years.
  • Daily examination records. OSHA does not require a written pre-shift checklist, but it is the simplest way to show the exams happen.
  • Repair records for defects found, showing the truck was taken out of service and fixed.
  • Capacity plates and manufacturer approvals for any attachments.

Run it in Dovient Lite

Add each truck as an asset with its location and a printed QR label, and attach a pre-shift checklist to a daily schedule. Operators scan the label and mark each item pass, warning or fail on the phone, with a photo of any defect, and the completed check stays on the truck's record with who did it and when. A failed truck can be reported as a breakdown, marked Failed until the repair work order is closed, and its checks and repairs exported as a PDF for an inspector.

Start with Dovient Lite

Sources

Rules change and vary by state and county. Check the current text with your inspector or authority having jurisdiction. Last reviewed 2026-11-15.

Questions

How often does forklift OSHA certification need to be renewed?
Each operator's performance must be evaluated at least once every three years, and refresher training is needed sooner after an accident, near miss, unsafe driving or a change in trucks or the workplace.
Is there an OSHA forklift test or license?
No. OSHA does not issue licenses. The employer trains, evaluates and certifies each operator, and the certification must show the operator's name, training date, evaluation date and the trainer or evaluator.
Do daily forklift checks have to be written down?
The standard requires the examination, not a written form. Most warehouses record it anyway, because it is the only way to show an inspector or insurer that checks happened.
What are common forklift OSHA violations?
Operators without a current evaluation or certification, trucks not examined before use, trucks with known defects left in service, and missing or illegible capacity plates.