Dovient

How-to

Forklift preventive maintenance schedule (by hours)

How to set up a forklift preventive maintenance schedule by hour meter: the daily check OSHA requires, typical service intervals, battery care, and what to record for each truck.

What OSHA requires

Under 29 CFR 1910.178(q)(7), every forklift must be examined before it is placed in service, at least daily, and after each shift where trucks run around the clock. A truck that is not in safe operating condition must be removed from service until it is repaired, and only authorized people may make repairs (1910.178(q)(1)). Battery charging must be done in a designated area with facilities to flush and neutralize spilled electrolyte, fire protection and ventilation (1910.178(g)).

OSHA does not set service intervals. Those come from the truck's manufacturer.

Forklift maintenance schedule by hours

These ranges are typical. Many manufacturers and dealers set planned maintenance at about 250 hours; follow your truck's manual, and shorten the interval for dusty, hot, cold or heavy-duty use.

  • Each shift: operator pre-use check (the checklist your operators already use, or the one in OSHA's sample).
  • Every 200 to 250 hours, or about every 3 months: planned maintenance. Lubrication, engine oil and filter on internal combustion trucks, brakes, steering, mast chains and rollers, hydraulic hoses, forks, tires, and a test drive.
  • Every 500 to 1,000 hours: hydraulic and transmission fluid and filters, fuel filter, and a deeper brake and mast inspection, as the manual sets.
  • Every 2,000 hours or yearly: major service per the manufacturer.

Forklift battery maintenance

  • Charge in the designated area only, and let the battery cool before use.
  • Check water levels after charging on flooded lead-acid batteries and top up with distilled water as the maker says.
  • Keep the top clean and dry, terminals tight, cables undamaged.
  • Wear eye and face protection and keep the eyewash nearby.

What to record

Keep each truck's daily checks, planned maintenance with the hour meter reading, and repairs with parts and cost. OSHA does not require a written daily check, but a signed record is the simplest way to show the examination was done, and it shows trends such as one truck with repeated hydraulic leaks. Operator evaluations are due at least every three years (1910.178(l)(4)(iii)).

Run it in Dovient Lite

Add each forklift as an asset with its hour meter and print a QR label for it. Attach a daily pre-use checklist to a daily schedule, and set planned maintenance by hour meter readings, for example every 250 hours, so a work order opens when the truck reaches its hours. Operators mark items pass, warning or fail on the phone, parts used come off stock and add to the truck's cost, and the dashboard shows downtime, MTTR and MTBF by truck.

Start with Dovient Lite

Sources

Rules change and vary by state and county. Check the current text with your inspector or authority having jurisdiction. Last reviewed 2026-11-15.

Questions

How often does a forklift need maintenance?
Planned maintenance is commonly every 200 to 250 hours, or about every 3 months, with a pre-use check every shift. Follow your truck's manual for the exact interval.
Does OSHA require a daily forklift inspection?
Yes. 29 CFR 1910.178(q)(7) requires each truck to be examined before use at least daily, and after each shift in round-the-clock operations.
Does OSHA require a written forklift checklist?
The rule requires the examination, not a written form. A dated, signed record is how most warehouses show it was done.
What should a forklift maintenance log include?
Date, hour meter reading, the work done, parts used, who did it and the cost, kept for each truck.