How to use the checklist
A building maintenance inspection works best as a fixed monthly walk, the same route every time, with one checklist. It catches leaks, failed lights, blocked exits and worn roofs early, while they are cheap. Seasonal and yearly items, many of them done by contractors, go on a separate schedule so they do not get forgotten.
- Walk the building in the same order each month: outside, roof access, mechanical rooms, common areas, restrooms.
- Mark each item OK or not, and take a photo of anything that needs work.
- Turn each problem into a repair job with a priority and a person assigned.
- Review the open repairs at the next walk.
Seasonal and yearly building maintenance plan
- Spring: roof inspection and drains, gutters cleared, HVAC switched to cooling and filters changed, irrigation started.
- Summer: exterior paint and sealant touch-up, parking lot striping and crack sealing.
- Fall: heating check and boiler or furnace service, gutters cleared after leaf drop, outdoor faucets drained.
- Winter: snow and ice plan, roof checked after heavy snow, freeze protection on exposed pipes.
- Yearly by contractors: fire alarm, sprinkler and extinguisher inspections, elevator inspection, backflow test, generator load test where you have one.
Who does what
Split the work by skill and license. Your own staff or a building engineer can do the monthly walk, filter changes, light bulbs, caulking, minor plumbing and door hardware. Licensed contractors handle fire alarm and sprinkler testing, elevator service, boiler and refrigeration work, backflow testing and anything electrical beyond replacing fixtures. Put both on the same schedule so the contractor visits are tracked like any other job, with the report attached when it comes in.
For a small building, a monthly walk takes about an hour. Larger buildings can split it by floor or wing across the month, so each area is still covered once.
Records to keep
Keep a building maintenance inspection report for each monthly walk, the repairs that came out of it, and the contractor reports for fire, elevator and backflow. Fire marshals, elevator inspectors, insurers and the water utility each ask for their own report. For your own planning, the history shows which systems fail most and helps build next year's repair and replacement budget.
Building maintenance monthly inspection
Monthly walk, plus the seasonal schedule
Exterior and roof
- Roof clear of debris, drains open
- No damaged flashing or ponding water
- Gutters and downspouts clear and attached
- Walks and parking without trip hazards
- Exterior lights working
Life safety
- Exit signs lit and exits not blocked
- Emergency lights pass the push-button test
- Fire extinguishers charged and in place
- Fire doors close and latch
Mechanical and plumbing
- HVAC filters changed on schedule
- No leaks at water heater or boiler
- Sump pumps run and discharge
- Mechanical rooms clean, not used for storage
Interior
- Restroom fixtures work, no leaks
- Ceilings without water stains
- Doors, locks and closers work
- Interior lights working
Inspected by, date and notes go at the bottom of the printed sheet.
Run it in Dovient Lite
Add the building's systems and equipment as assets with their locations, and set a monthly schedule with this checklist plus date schedules for the seasonal work. The person doing the walk marks each item pass, warning or fail on the phone with photos, and the completed checklist stays on record with who did it and when. Repairs become work orders, and the dashboard shows what is open and overdue.
Start with Dovient LiteQuestions
- How often should a building be inspected?
- Walk it monthly with a checklist, add seasonal checks for the roof and HVAC, and have contractors do the yearly fire, elevator and backflow inspections your local codes require.
- What should a building maintenance checklist include?
- The exterior and roof, life safety items (exits, emergency lights, extinguishers, fire doors), mechanical and plumbing, and the interior: restrooms, ceilings, doors and lights.
- What is a building maintenance plan?
- A list of what gets checked and serviced in the building, how often, and by whom: your own staff for the monthly walk and small repairs, contractors for licensed work like fire alarm and elevator inspections.