Lift station, well and septic service on schedule
Set the lift station's weekly check (float and alarm test, pump run hours, wet well condition) and service each pump by run hours from its meter. Schedule the well's chlorinator check, the water sampling your permit requires, and septic pump-outs by date. Each work order opens when it's due, with its checklist attached.
Septic, water and lift-station maintenance for mobile home parks
Monthly park inspection on a phone
The manager walks the park with one checklist: roads and potholes, street lights, drainage and culverts, fire hydrants, vacant lots, dumpster area, clubhouse and laundry. Each item is pass, warning or fail with a photo, and anything failed gets a work order opened from the check.
Mobile home park maintenance and inspection checklist
Report a problem without the phone tag
A resident calls about water bubbling up near lot 12. The manager or handyman picks the water line in the app, describes the problem, adds a photo and marks it a breakdown. The people assigned to requests are notified, and it becomes a work order everyone can follow.

Shutoffs, fittings and pump parts in stock
Keep curb stops, shutoff valves, PVC fittings, water meter parts, lift station floats and street light bulbs in the parts list with a minimum quantity. Parts used on a repair come off stock and add to that asset's cost, and anything below its minimum shows as low stock.

Every repair in the park in one list
Each repair is a work order: who reported it, who is on it, photos, notes and status. The manager and one or two maintenance staff work from the same list on their phones, outside contractor charges go on the job, and overdue work shows on the dashboard.
Records for the state park license and water system
Parks are licensed and inspected by the state or county health department, and a park well serving 25 or more residents is a public water system. Export the completed park walks, water system checks and repairs as a PDF when the inspector or the state drinking water program asks.
Each pump, road and building's history and cost
Every lift pump, well, road section and common building has a record with its checks, repairs, parts and cost. When a lift pump fails for the third time this year, the record shows what it has cost and how often it fails (MTBF), which settles the repair or replace question.
How setup works
- 1
Add your park's assets
Import your pumps, wells, roads, lights and buildings from a spreadsheet (CSV or Excel) or add them one at a time.
- 2
Set inspections and service schedules
Choose the checks you need (monthly park walk, lift station, well) and when each comes due, by date or pump run hours.
- 3
Invite your manager and maintenance staff
They install the app and sign in. Each person sees the checks and repairs assigned to them.
Set up Dovient Lite with us
Tell us how many lots your park has. We'll go through your water, sewer and park inspections with you and set up your account.
Prefer to start on your own? Start with Dovient Lite
Mobile home park checklists and guides
All templatesQuestions
What is mobile home park maintenance software?
Software that keeps the park's inspections, scheduled service and repairs in one place. Dovient Lite does this for mobile home parks: the monthly park walk on a phone, lift station and well service on a schedule, and a repair and cost history for every pump, road and building. It does not collect rent or manage leases.
Is a mobile home park's well a public water system?
Usually. Under the Safe Drinking Water Act, a system with at least 15 service connections or serving at least 25 people for 60 or more days a year is a public water system, and a park with year-round residents is typically a community water system. That brings routine coliform sampling under the Revised Total Coliform Rule, a certified operator in most states, and the records your state drinking water program inspects.
Who inspects mobile home parks, and what are the requirements?
Most states license parks through the health department or a housing agency and inspect water, sewage, roads, lighting and lot spacing. Florida, for example, regulates mobile home parks under Chapter 64E-15 of the Florida Administrative Code. Rules and inspection frequency vary by state and county.
Can I log lift station run hours and chlorine readings?
Yes. Pump run hours can be entered as a meter reading that drives the pump's service schedule, and chlorine residual is typed into the checklist and marked pass or fail. Dovient Lite does not raise alarms from these readings; a person opens the work order when one is out of range.
Can residents report problems in the app?
Not on their own. Requests come from signed-in staff, so the manager or handyman files the resident's call from the phone with a photo. There is no public request form.
Can I track repair costs for each pump and road?
Yes. Labor, parts and outside contractor charges on each work order add up on that asset's record. You can export cost by asset to plan next year's capital work.
Does it track my park license renewal date?
No. Dovient Lite doesn't have a permit or license calendar. You can set a yearly work order for the renewal paperwork, and it opens on that date like any scheduled job.
How often should a lift station be checked?
Follow your wastewater permit and the pump manufacturer. Many small systems check floats, alarms and pump run hours weekly and service the pumps by run hours. Both go on a schedule in Dovient Lite.
Is Dovient Lite mobile home park management software?
No. It does not handle rent, leases or resident billing; keep your park management software for those. It covers the park's infrastructure: wells, lift stations, roads, common buildings and repairs.
How much does Dovient Lite cost?
Plans and prices are on the Dovient Lite pricing page: dovient.com/lite/pricing.
Reviewed
Stay ahead of the park's water, sewer and road repairs

